
How Underfloor Heating Works
Underfloorheatingmats.co.uk : store
Click Below For More Information.
How Carbon Film Is Made
The carbon heating elements are constructed of a uniformed coating over a polyester film. Electrical floor energy is then brought into the film from factory connected"cold cable" leads which connect to the copper strips and here it is transformed without loss into thermal energy.
Thickness of the Film: 225 to 400 micron
Power: 70w/M2 to 180w/M2
Sizes (width overall): 400 to 100cm
Buss Bar: Copper/Tinned Copper
In order to allow for an introduction of low temperature heating systems in the next decade it its vital that we start changing over from our conventional heating systems to lower temperature radiant heating systems.
Substantial Heating Savings
The Carbon Film Heating system is the perfect answer to under laminate, wood and parquet flooring, ideal for any renovation, as each room is individually controlled by an advanced thermostat giving you the ultimate in comfort and upto 20% savings on heating costs.
Low Temperature Heating
With Carbon Film Heating System, your actual comfort can be increased in several factors, more heat transfer, less gradients a more comfortable floor temperature and less draught and turbulence.
Technical Data
- Description - Laminate polythene (polyester) carbon coated heating elements
- Power Supply 230/115 volts AC
- Standard density - 120 watts per sqm (available from 60-200w)
- Individual element rating 10 amps
- Maximum surface rated temperature 60 deg C
- Connection - in parallel to thermostat with floor sensor
- Standard widths 53cm, 40cm, 60cm 100cm
- Approvals CE & Nemko approved
- Element length - max -100/150 linear metres
- Reccommended power density between 50% - 100% increases on the Buildings net heat heat loss per sqm - this will facilitate reasonable warm up times form cold - usual output for domestic installations80-120 watts per Square metre over a typical room/building.
- Suitable for primary heating or comfort heat source.
- Reccommended control air/floor sensor
- Factory made cold cable connections from elements connected together in a Parallel at connection box before thermostat
- Thermostat with temeperature limiter - carbon heating elements is operated by a digital thermostat specially designed for floor heating with a temperature limiter for operation under wood floor in 28-30?C.
- Cold cables 1.5mm diameter double insulated cable as required for under floor insulation.
- Installation below timber or laminate floating floor - 6mm palziv Insulation is laid out and completely covers existing floor (concrete or timber floor) the carbon film is laid directly on top of the palziv insulation and Covered with a moisture barrier before wood or laminate floating floor is Laid
Floorite Product Search
Looking for something in particular?
Installation Help, Tips & Advice
Help And Advice For Underfloor Heating
We pride ourselves on providing a full service, which includes good customer.. More
Technical Downloads, Help Sheets
Technical Downloads (PDF Format)
What size?, Help with Styles, Trouble with Part A to Part B?.... More
View Your Cart, Delivery Information
Contacting Us Direct
Call: 0800 310 1231
Or Contact Us Online Here
underfloor heating special offers...
Devi Direct Heating Kit 38-43 sqm 8420 Watt
Devi Direct Heating Kit includes ...
Was: £662.97
Now: £629.82
Advanced Ribbon Heating 1m x 2.5m
1.63 amps
Was: £82.75
Now: £78.61
316 Chateaux Oak
£8.03 m2 + V.A.T.
£19.12 + V.A.T. Pack Price
(2.38 m2 Per Pack)
Was: £19.12
Now: £18.16
Devimat 4.0 sqm 150 watt for concrete floors
The Devimat 150 watt is designed for use on concrete sub-floors. If your floor is timber then please use the ...
Was: £201.58
Now: £171.34
Advanced Ribbon Heating 0.5m x 4m
1.95 amps
Was: £66.20
Now: £62.89
Devi Direct Heating Kit 27-29 sqm 5810 Watt
Devi Direct Heating Kit includes ...
Was: £476.00
Now: £452.20
Floorite Infomation Pages
